Back to Homepage

 

Thoughts about ‘Improving’

 

 

In the past many factory cartridges were converted by reducing body taper plus creating a steeper shoulder for more powder space, ‘better’ powder burning and reduced bolt thrust. Many can even use factory ammunition in the new chamber - a very important aspect for P. O. Ackley . It is just that procedure we usually call ‘Improving’ . Famous examples are the ACKLEY IMPROVED cartridges.

      

 

Another way to improve a factory case is extending the straightened body by shortening the neck to a sufficient minimum. When you go that far you have to think about assuring proper head space while fire forming. For that kind of treatment the GIBBS cartridges are typical:

      

      

Some  people are quite enthusiastic about the performance or maybe too enthusiastic and some believe that little real extra power is not worth the effort.

To get an impression of what you can expect when improving a case one should look at some well known examples:

The 7x57Mauser  is a typical candidate for improving due to its long neck, long shoulder and old fashioned body taper.

         So let us see what the different ways of improving mean in real numbers as far as powder space is concerned:

Calculations are based on identical case weight!

Using this example we can see that the most important step is reducing body taper. Moving the shoulder comes second and increasing the shoulder angle comes last. That would be different if the parent case has a very shallow shoulder like the 300H&H.

If you combine a short neck and a shoulder angle of 40° you will get the largest increase.  That’s not very surprising but would it be wise?

A long neck is good for accuracy. A neck length of one caliber length or slightly more seems to be a good compromise. A shoulder angle of 40° can lead to feeding problems depending on actual proportions. The true benefit of a 40°shoulder for powder burning – if any - can only be proved in comparison to a version  with a more gentle shoulder. It is reported that a 40°shoulder prevents the case from stretching. This would be a real advantage.

When your parent case already has a rather straight body and a large volume your results will be more humble. See the .30-06Springfield/.30-06Ackley Imp.:

Calculations are based on identical case weight!

4.2 % more powder space of the .30-06Ackley Imp. is not very impressive. That may be the reason why this round is discussed a lot.

Probably the most successful Improving25-35 Ackley Improved:

Volume Difference: 25%

 

Some published performance data of improved cartridges are really breath taking. As we do not know much about the circumstances of these measurements we should always be sceptical.

Most recently introduced factory cartridges have minimum body taper and large shoulder angles. Improving these cases will be real challenging.

 

 

Home